KLABXB Bluetooth Express Digital In-wall Stereo Amplifier
Easily add music to your kitchen, bedroom, study, bathroom etc. This tiny wall mount amplifier fits into a standard UK two gang pattress and provides a powerful 20W RMS per channel. In operation it really couldn't be any easier. When you want to use it simply connect via Bluetooth and control the volume with your bluetooth device. When you disconnect or stop streaming the amplifier automatically switches into very low power standby mode. Whenever you connect again it instantly wakes up to deliver clear powerful audio.
There are no switches or remote controls, it really is a fit and forget solution. During installation you can choose from one of seven Bluetooth ID's to make sure you are always connecting to the correct amplifier. Its also easy to use with an Amazon Echo Dot.
Installation should only be carried out by a qualified installer or electrician, as a certain amount of electrical knowledge is assumed. The KLABXB is not IP rated for use in damp environments but if due care is given to positioning of the amplifier and supply then it can be used in zone 3 installations. Please use a qualified electrician operating to current regulations if you intend to use this unit in a bathroom.
- Up to 20W RMS per channel
- Low distortion Digital Class D design means high efficiency with minimal heat produced
- Fully Automatic fit and forget design
- Ultra low current draw in standby (less than 20mA0.3W 15vDC)
- Supports Bluetooth SSP for quick pairing.
- Supports A2DP Codecs: SBC - MPEG1 and 2 audiompeg 2.4 AAC ATRAC APTX
- LED's for status and confirmation
- Flush mount or surface mount (25mm depth or 35mm for dry-lining)
- Detachable speaker connectors for easy install
- Power Supply included
Keene KLAB20XB Bluetooth In Wall Amplifier White (Each)
for Keene KLAB20XB Bluetooth In Wall Amplifier White
for: Keene KLAB20XB Bluetooth In Wall Amplifier White