In-Wall-SpeakerCraft-Profile-Aim-LCR5-FIVE-Series-2-
In-Wall-SpeakerCraft-Profile-Aim-LCR5-FIVE-Series-2-
In-Wall-SpeakerCraft-Profile-Aim-LCR5-FIVE-Series-2-

SpeakerCraft Profile Aim LCR5 FIVE Series 2 In Wall Speaker (Each)

Speakercraft

Regular price £1,064.00 Sale



Aim Series 2 In-Wall LCR Speaker with dual 134mm Kevlar Bass drivers and 25mm Titanium Dome Tweeters employs the all-new Arrayed Point Source™ (APS) Tweeter Module. The APS module incorporates three pivoting titanium dome tweeters mounted in a rotational sound baffle to precisely focus the high frequency sound into the targeted listening area, reducing unwanted reflections. The bass drivers are angled within the assembly for enhanced clarity in the vocal frequencies.

The AIM LCR5 FIVE Series 2 takes the key technologies developed for the AIM Series 2 in-ceiling line and applies them to the new LCR speakers, with the technology delivering an exceptional home cinema experience.

And the AIM2LCR55 uses SpeakerCraft’s Acoustic Isolation Technology to minimise acoustic energy transfer to the mounting and surrounding surfaces.

The new AIM2LCR55 employs the all-new Arrayed Point Source™ (APS) Tweeter Module. The APS module incorporates three pivoting titanium dome tweeters mounted in a rotational sound baffle to precisely focus the high frequency sound into the targeted listening area, reducing unwanted reflections. Like their AIM Series 2 in-ceiling counterparts, the extra surface area from the three tweeters enables a lower crossover point; this delivers extra sound pressure in the midrange frequencies critical for crisp, clear dialog.

The AIM2LCR55 is designed to pair with the ATX100 Height Speaker to create a Dolby Atmos® enabled system, part number: ATS500.

- Flangeless Appearance with Magnetically Attached, Low Profile, Full Coverage Trimless Grille
- 2-Way Speaker Compliment in MTM (Mid-Tweet-Mid) Alignment
- Extended Pole Pieces
- Forced Convection Cooling
- Core periphery vents with flux modulation control geometry
- 4 Layer High Inductance Voice Coil
- Controlled inductance for a smoother power response
- Copper Clad Aluminium Voice Coil (CCAW)
- FEA Optimized Woven Kevlar Cones
- High Loss Butyl Surrounds
- Deep Motor Design
- Kapton Formers
- Arrayed Point Source (APS) Tweeter Module
- Incorporating Three (3) Pivot-able, 1" Custom Titanium Dome Tweeters
- Mounted on a Rotational Sound Baffle for Custom Sound Steering
- 2nd and 3rd Order Asymmetrical Crossover Design
- Pivotable Sound Baffle for Precise AIM-ability of Acoustic Energy for Primary Assembly
- AIT (Acoustic Isolation Technology) to Minimize Acoustic Energy Transfer to Mounting and Surrounding Surfaces

SpeakerCraft Profile Aim LCR5 FIVE Series 2 In Wall Speaker (Each)

  • for SpeakerCraft Profile Aim LCR5 FIVE Series 2 In Wall Speaker

  • for: SpeakerCraft Profile Aim LCR5 FIVE Series 2 In Wall Speaker